Read the label
Station specs come from the maker. Appliance watts come from an energy label, a user guide, or a nameplate. A store's unsourced chart does not count.
Ocala, Florida · United States first · Worldwide readers
A Jackery, an EcoFlow, a BLUETTI, a plain inverter, or a generator: the useful question is whether your appliance fits the outlet, and how long the battery lasts after inverter loss. Every number on this site is a cited spec or a calculation you can redo. The planning loss is 85%.
Specs were read from the maker's own page. Where that page disagrees with itself, the station page says which figure the math uses.
Yes, no, or maybe, then the runtime. A maybe means a cited number is missing, usually the startup watts, or the appliance range straddles the outlet.
Maybe. GE energy labels for full-size fridges average well under 1,500 W, but those labels do not publish compressor startup watts.
The RIVER 2 can power a ResMed AirSense 11. At 7 W the estimate covers more than one night. At 56.1 W it does not last until morning.
Maybe. Zoeller's M53 draws 9.7 A at 115 V, under the AC180's 15 A outlets, but Zoeller does not publish starting amps.
One station and one appliance. The verdict is checked against the specs when the site is built.
3 pagesRated watts, surge, watt-hours, chemistry, and outlets. Each row points at the manufacturer page.
6 pagesRunning watts, and starting watts when a maker actually published them. Ranges stay ranges.
Station specs come from the maker. Appliance watts come from an energy label, a user guide, or a nameplate. A store's unsourced chart does not count.
Usable watt-hours = capacity × 0.85. That is a hedge for inverter loss. It is shown on every pairing, and it is not subtracted twice.
Hours = usable watt-hours ÷ watts. A fridge energy label is already an average, so it is not divided by a duty cycle again. The calculator lets you type a duty cycle when you measured compressor-on watts yourself.